1、 Glue can be used to heat better. There are several key components with high heating: chip, MOS tube, transformer, rectifier bridge, etc. when driving power supply, the temperature of these components will be much higher than that of other components. However, it is not enough to rely on simple heat dissipation. Antrsi series of power supply adopts the form of bare board filling half glue, and the temperature can be quickly and evenly, which increases the heat dissipation area, The heat dissipation will be faster, and we use the sealing glue with high heat dissipation coefficient, which makes the heat conduction more effective, and can quickly cool the power supply bare board.
2、 The protection of power supply is more secure. After the power supply is filled with glue, it can be moisture-proof and dust-proof, and slow down the aging speed of components, effectively improving the power supply safety, stability and durability. The different application environment of LED lamp has a very obvious test on core drive, especially in the application environment with great humidity or dust. LED driving circuit is greatly affected. Such an environment, easy to cause the power failure probability. For example, in a dusty environment, if there is air hole left for the power supply, dust can enter the interior of the lamp. The electric ions generated during power supply work easily absorb the dust. For example, the power supply of bare board, dust adsorption may cause circuit short circuit blaster, and the collection power supply filled with half glue can avoid such a situation.
3、 The poor rate of driving power supply is lower. For power supply manufacturers, glue filling will undoubtedly increase the difficulty of repair that may appear in the future. However, we have strengthened the research and development, developed stable power products, strengthened the control of quality, refined production technology, 100% of the test aging before shipment, and controlled the defective rate to the lowest or even 0 bad. So, we still worry about repair.
4、 Half glue has a protective effect on the components. During the process of transportation and installation by lamp manufacturers, many bumps and collisions can be avoided, and the improper operation caused by improper operation of a few lighting manufacturers' workers can be avoided.
