Home > Products > AC to DC power adapter 12V2A > Wall Plug Adapter

Products

Phone Charger 5V 1A Adapter For Uk CE

Eahunt will provide long-term accumulated power supply technologies for more applications, covering consumer electronics, industrial, lighting, smart home, medical and other electrical products. All the products meet the requirements of EU ERP VI and U.S. DoE VI/CEC VI (six level of energy efficiency standard) and come with safety approvals of UL、CE、 CCC、CB、ETL、GS 、BS、KC、SAA、PSE、RoHS etc. marks and reliability certifications

Send Inquiry

Description

product-750-413

With all the certifications UL, ETL, FCC, CE, CB, GS, CCC, CQC, PSE, KC, KCC, SAA, RCM, etc.

WHY EAHUNT

Warm tips

1. The power adapter will heat up during use, which is normal, just keep it well ventilated;

2. Under normal circumstances, the voltage must reach the voltage volts; and the current can not be less than the rated current of the electronic product, otherwise it may burn the product chip;

3. There are many power supply products on the market, for cost considerations, many manufacturers have cut corners or the use of recycled electronic components phenomenon, which will lead to unstable quality of power adapters and output current has a phenomenon such as clutter, serious injury to the machine, customers should be careful when purchasing!

4.Pictures, prices, product attributes, for reference only, not as a transaction price, specific in kind shall prevail, welcome to call us for advice!

Instructions for use

1. Please read the product specifications carefully before use, refer to the power supply label to confirm that the input grid voltage in the fixed range;

2. AC input current formula: Input current = output power ÷ input voltage ÷ input power factor ÷ power efficiency;

3. Do not open the cover of the power supply or disassemble the power supply to prevent electric shock or damage to the product;

4. Keep the distance between the power supply and heat dissipation equipment during installation;

5. When the technicians test the switching power supply, the method is to use an oscilloscope with a bandwidth of 20MHZ, in order to avoid the influence of external radiation and interference, please remove the ground clamp of the probe during the test, and connect the ground ring of the probe to the ground of the power supply output, and the probe is connected to the power supply's output voltage terminals.