Factory Direct Sale E-Bikes Adapter

With all the certifications UL, ETL, FCC, CE, CB, GS, CCC, CQC, PSE, KC, KCC, SAA, RCM, etc.

In this weather is getting hotter and the temperature is rising rapidly, we have to be more careful when charging our traveling tools - electric bikes - in an open and ventilated place. But what about the malfunction when the power adapter is working?

The power adapter heats up abnormally when charging, and the shell appears to be burned and deformed

Eahunt speculates that if we use the original power supply that we just bought, the charging abnormality is most likely due to the fact that we have developed a ringing habit: the adapter is placed in the car and carried with us. In the case of poor road conditions, the power adapter bumped, resulting in some components loose, so the phenomenon of charging anomalies. For example: the temperature of the adapter is not normal when charging, generating a lot of heat, and in severe cases, the power supply shell may also appear to smoke. To solve this problem is not difficult to say that it is not difficult to say that it is not simple, to use a little knowledge of power supply and practical ability to use a screwdriver to dismantle the shell, and then re-solder the loose components fixed on the line.

Power indicator light, the charging indicator shows orange

First of all, check the power adapter output plug and the battery box charging plug is not plugged tightly. If you are sure that there is no problem, you can check whether the battery box above the bail is open circuit or the fuse holder whether there is a loose contact phenomenon.

The output voltage is normal, but the charging current is very small

When encountering this situation, you can check whether the internal circuit of the power adapter is open circuit, use a multimeter to measure the voltage of the power adapter is normal, if normal, it may be a bad charging line, first go outside to buy a power cord with the same interface, it is best to go to a regular store, remember to have the same interface. Take the shell apart and replace it with one that can eliminate the fault.

If your electric bikes power adapter in the charging encountered these problems, do not panic, in accordance with Eahunt above overhaul guide to do it.Eahunt power supply manufacturers, its power supply product categories, complete certification. Factory direct sales, more cost-effective!

Eahunt

Reception

Team

Boss of R&D